|
Post by schlager7 on Jul 22, 2005 15:00:06 GMT -6
Also from the Semi Commission report:
Proposition 1 : 4 Rules Specific to Sabre
(page 17) c) Conductive Jacket – This title is changed for c) Conductive Jacket and conductive T-Shirt m.34 becomes m.34.1 with the current text of m.34. Introduction of a new paragraph
« m.34.2 At wireless Sabre the fencer must wear a conductive T-Shirt. The conductive part is made with a conductive material, with an electrical resistance measured between any two points of the lamé material, which must not be greater than 5 ohms »
Alternately, this is possible to insert the text of the T-Shirt in the paragraph m.35 m.35 Conductive T-Shirt for wireless Sabre In that case, all subsequent paragraphs will need a re-numbering.
Motivation : Fencers wear conductive T-Shirt at wireless Sabre, this is therefore necessary to precise the technical specification of the electrical resistance as this T-Shirt will have to be presented at the checking of material. Opinion of the Executive Committee : replace “electric” by “ohmic”
Opinion of the SEMI : “electrical resistance” must be kept, because the electrical theory indicates the definition formula of this resistance, which is measured in ohms.
|
|
|
Post by Parry Nine on Aug 4, 2005 13:46:55 GMT -6
So, no more "lames"? Will the old ones still be compatible with this system?
|
|
|
Post by fox on Aug 4, 2005 14:00:12 GMT -6
Conductive Jacket – This title is changed for c) Conductive Jacket and conductive T-Shirt m.34 becomes m.34.1 with the current text of m.34. Introduction of a new paragraph If I understand correctly, the lame T-shirt is in addition to the regular sabre lame. Dontcha know THAT gets a little warm after a very short while!
|
|
|
Post by Aldo N on Aug 13, 2005 8:18:18 GMT -6
Why, exactly, is a conductive T-shirt rquired? What is its function?
|
|